防風抑塵網廠家產品圖片
防風抑塵網是用金屬板或鍍鋅板經過數控龍門沖床流水線沖壓帶成型裁剪最后表面噴塑成品，生產速度快出貨發貨快不耽誤客戶需求，防風抑塵網主要是用來防止刮風把廠區內一些物品飛起造成空氣渾濁污染，單層擋風抑塵墻抑塵效果可達65～85%，雙層擋風抑塵墻效果可達95%以上三峰是科學院風洞試驗得出的結論防風最為合適一種也是效果最佳的有需要的可以和河北逍迪絲網制品有限公司溝通報價購買
The wind proof and dust suppression net is made of metal plate or galvanized plate, which is shaped and cut through the production line of numerical control gantry punch, and the final surface is sprayed with plastic products. The production speed is fast, the delivery speed is fast, and the customer demand is not delayed. The wind proof and dust suppression net is mainly used to prevent the air pollution caused by some items flying in the factory area by the wind. The dust suppression effect of single-layer wind proof and dust suppression wall can reach 65-85%, and that of double-layer wind proof and dust suppression wall can reach 65-85% The effect can reach more than 95%. Three peaks is the conclusion of wind tunnel test of Academy of Sciences. Windbreak is the most suitable one and the best effect. If necessary, you can communicate with Hebei Xiaodi silk screen products Co., Ltd. for quotation and purchase
Aluminum plate as the basic material does not need surface treatment
As the basic material, the color coated board does not need surface treatment
Stainless steel plate as the basic material does not need surface treatment
As the base material, cold plate needs to be sprayed with double-sided high voltage electrostatic powder
As the basic material, galvanized sheet needs to be sprayed with double-sided high voltage electrostatic powder
防風抑塵網可以選擇噴塑也就是靜電粉末噴涂這也是人們常用的表面處理方式和不處理，不處理一般都是鋁板和不銹鋼板還有彩鋼板不需要處理的多
The wind proof and dust suppression net can be sprayed with plastic, that is, electrostatic powder spraying, which is also the common surface treatment method and non treatment. It is not treated generally by aluminum plate and stainless steel plate, and color steel plate does not need to be treated much
成型寬度在250mm--500mm之間，峰高50mm--100mm,長度在4米之內都可以加工，板材厚度0.5mm--1.5mm,在以上范圍之內，可以根據客戶的要求進行加工制作
The molding width is between 250mm-500mm, peak height is 50mm-100mm, and the length is within 4 meters. The thickness of plate is 0.5mm-1.5mm. Within the above range, it can be processed and manufactured according to the requirements of customers
成型寬度在400mm--600mm之間，峰高50mm--100mm,長度在10米之內都可以加工，板材厚度0.5mm--1.5mm,在以上范圍之內，可以根據客戶的要求進行加工制作
The molding width is 400 mm-600 mm, the peak height is 50 mm-100 mm, the length is within 10 meters, and the plate thickness is 0.5 mm-1.5 mm. In the above range, it can be processed according to the requirements of customers
成型寬度有825mm，峰高50mm-80mm,長度在6米之內都可以加工，板材厚度0.5mm-1.5mm，可根據圖紙進行加工制作防風抑塵網長度最長不得超過6.15米（網長越長，鋼結構的距離越遠，擋風效果越差）峰高7.5cm防風效果最佳，此為國家科學院風洞試驗得出的結論防風最為合適一些
The forming width is 825mm, the peak height is 50mm-80mm, The length can be processed within 6 meters, and the thickness of the plate is 0.5 mm-1.5 mm. The windbreak and dust suppression net can be manufactured according to the drawings. The longest length of the net shall not exceed 6.15 meters (the longer the net is, the farther the steel structure is, the worse the wind proof effect is). The peak height of 7.5 cm is the best wind proof effect, which is the conclusion of the wind tunnel test of National Academy of Sciences
訂貨須知：當您在我廠下單之后，您只要放心的在家坐等收貨就可以了，接下來的事由我們為您完成，我們的負責人員開始下單排產，按照您的需求將您所需要的沖孔板認真的完成，然后我們會和您溝通好收貨方式，為您找到您最方便接貨的物流，是整車，還是配貨，為您計算好，談好最合適的價格，再為您的產品穿上一層防護衣，保證它完好無損的送到您的家里
生產周期：根據客戶訂單量的大小和您商談好生產周期
付款方式：選擇我們之后，預付30%，生產完成后，我們會通知您，您將剩余的貨款打到我方賬戶，我們開始為您發貨
產品包裝：根據產品的精度和用途，我們會選擇簡裝或是精裝，以保證貨品的安全（可以溝通）
運輸方式：本地有通往全國各地的物流，可以零擔，整車，配貨，陸運，空運，海運和TNT，DHL，FEDEX，UPS，EMS，快遞，小件快運，我們會和客戶商量好，為您選擇最經濟合適的運輸方式，絕不讓您多花一分錢
質量保證：客戶收到貨后5天內，如發現材質不達標，規格有誤，我們將無條件為您退貨或調換，如是對方下單有誤，我們只能努力幫助您改進到最好為止，這便是我們河北逍迪絲網制品有限公司最人性化的服務方式，您準備好了嗎？我們時刻準備著，隨時歡迎全國各地的新老客戶來電咨詢和來廠參觀考察定做
Copyright ? 2002-2020 河北逍迪絲網制品有限公司 版權所有 冀ICP備17023073號-13 XML地圖
